|
 |
|
|
 |
| DIN clips allow the user to mount a switch to a DIN rail - 25 or 35mm rail. Ethernet Direct switches are shipped with a DIN clip. The clips are attached to the back of the switch with 2 screws. |
|
|
|
|
|
 |
| The wall mount plate allows the user to mount a switch to a back panel or flat surface. Ethernet Direct switches are shipped with a wall mount plate. The plates are attached to the back of the switch with 6 screws. |
|
|
|
|
|
 |
| Dust caps for unused ports - Ethernet Direct switches are shipped with dust caps for every port. Get some for your other switches that have ports exposed to the elements. |
|
|
|
|
|
 |
| The console cable is for programming a managed switch through the TelNet port. It has a DB9 connector on one end and an RJ11 connector on the other. |
|
|
|
|
|
 |
| These terminal blocks fit all Ethernet Direct switches. Each has 6 terminals for dual power inputs and the alarm contact. Pick up a few spares. |
|
|
|
|
| |
